Princeton Instruments NIRvana-LN, User Manual, Page: 81 / 122

Chapter 9 Non-Destructive Readout 81
Frame Tracking must be enabled when using NDRO. By default, LightField automatically
enables Frame Tracking when NDRO is enabled. However, if Frame Tracking is manually
disabled, an Experiment Conflict is reported and displayed within LightField. See
Figure 9-4 .
Figure 9-4: Experiment Conflict: Frame Tracking Disabled During NDRO
During data acquisition, the Frame Tracking number is incremented only at the start of a
Destructive Readout (DRO) cycle. When NDRO used:
•
The tracking number starts at 0;
• Is not incremented for interim NDRO cycles;
•
Increments on each DRO.
44
11-
0145
_0006