Princeton Instruments NIRvana-LN, User Manual, Page: 106 / 122

106 NIRvana
™
-LN System Manual Issue 4
C.2 Replace F-Mount Adapter
Before the NIRvana-LN can be attached to the IsoPlane 320, the spectroscopy-mount
adapter must be installed on the camera, replacing the standard F-mount adapater.
Perform the following procedure to replace the standard F-mount adapter with the
spectroscopy adapter on the NIRvana-LN:
1.
Using the #2 screwdriver, remove and retain the seven (7) screws securing the F-Mount
adapter to the nose of the NIRvana-LN. See
Figure C-2 .
Figure C-2: Removing F-Mount Adapter from NIRvana-LN Nose
2.
Carefully slide the adapter away from the NIRvana-LN to remove the F-Mount Adapter
from the camera.
3.
Carefully position the spectroscopy adapter on the nose of the NIRvana-LN. Verify all
mounting holes in the adapter align with those on the camera.
4.
Replace and tighten the seven (7) screws removed in step 1.
44
11-0
145_0
059
R
EMOVE
(3
OF
7)
R
EMOVE
(4
OF
7)