Princess 493041, Manual, Page: 8 / 44

8
EN
Clean the area around the drive wheel with
a damp cloth. To remove stubborn dirt,
clean the surface with a damp sponge and
a few drops of washing-up liquid.
Clean the blade and the blade lever after
•
each use:
- Remove the blade lever.
- Clean the blade and the blade lever with
a damp cloth.
- To remove stubborn dirt, clean the
surface with a damp sponge and a few
drops of washing-up liquid.
- Thoroughly dry the blade and the blade
lever.
- Mount the blade lever.
Put the mains cable in the cable storage in
•
the back of the appliance. Feed the mains
cable through the notch for convenient
storage.
Put the appliance in the original packaging.
•
Store the appliance in a dry and frost-free •
place, out of the reach of children.
Safety instructions
General safety
Read the manual carefully before use. •
Keep the manual for future reference.
Only use the appliance and the accessories
•
for their intended purposes. Do not use the
appliance and the accessories for other
purposes than described in the manual.
Do not use the appliance if any part or any
•
accessory is damaged or defective. If a part
or an accessory is damaged or defective,
it must be replaced by the manufacturer or
an authorised repair agent.
Do not use the appliance near bathtubs,
•
showers, basins or other vessels containing
water.
Do not immerse the appliance in water or
•
other liquids. If the appliance is immersed
in water or other liquids, do not remove the
appliance with your hands. Immediately
remove the mains plug from the wall socket.
If the appliance is immersed in water or other
liquids, do not use the appliance again.
Children should be supervised to ensure
•
that they do not play with the appliance.
Open cardboard cans with frozen juices or •
food as soon as they are removed from the
freezer.
Aluminium lids will not stick to the magnet.
•
Sharpening knives and scissors
(fig. A & D)
Before you proceed, we need you to pay
attention to the following notes:
- Beware of sharp parts. Be careful with the
cutting blade after sharpening the tool.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the appliance for sharpening
serrated cutting blades.
Remove the mains plug from the wall socket. •
Before sharpening, clean and dry the •
cutting blade of the tool.
Hold the appliance with one hand.
•
Place the cutting blade of the tool in the •
slot of the blade sharpener (7).
Sharpen the entire length of the cutting
•
blade by carefully moving the tool back
and forth through the slot.
After sharpening, clean and dry the cutting
•
blade of the tool.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
- Before cleaning or maintenance, always
switch off the appliance, remove the mains
plug from the wall socket and wait until
the appliance has cooled down.
- Do not immerse the appliance in water or
other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
- Do not clean the appliance in the dishwasher.
Regularly check the appliance for possible •
damage.
Clean the outside of the appliance with
•
a damp cloth.