Princess 321010, Manual

Page: 6 / 15

6
EN
To press inseam, place the pressing cushion •
under the area to be pressed.
Place the pleated area onto the ironing
•
board. Carefully fold and press the pleats.
Other hints
Use the spray bottle in order to lightly spray •
fabrics and remove the most stubborn creases.
Place a damp cloth over the fabric to remove
•
the most stubborn creases.
Place embroidery, buttons and zips face-
•
down onto the ironing board.
In order to press delicate fabrics, place the
•
pressing cushion between the fabric and
the pressing plate.
In order to press large pieces of fabric, place
•
the fabric behind the ironing board. Slowly
pull the fabric towards you, over the ironing
board, and carefully press the fabric section
after section.
Cleaning and maintenance (fig. A - C)
Before you proceed, we need you to pay
attention to the following notes:
-
Before cleaning or maintenance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
- Do not immerse the appliance in water or
any other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
-
Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
Regularly check the appliance for possible •
damage.
Regularly check the water reservoir for
•
possible leakage.
Clean the appliance after each use:
•
- Place the appliance on a stable and flat
surface.
- Turn the locking knob (7) into the direction
of the unlock symbol to unlock the pressing
plate (6).
- Raise the pressing plate (6).
- Make sure that the water reservoir (8)
is filled with water and placed into the
appliance.
- Place the pressing cushion (10) in the
middle of the ironing board (5).
- Place a clean towel over the pressing
cushion (10) and the ironing board (5).
- Touch the LINEN key (17e). The LINEN
indicator (17e) comes on.
- If the steam shot indicator (15) comes
on, lower the pressing plate (6) onto the
pressing cushion (10).
- Press the steam shot button (3) 6 times.
- Allow the appliance to cool down
completely.
- Clean the pressing plate (6) with a soft,
damp cloth. Thoroughly dry the pressing
plate (6) with a clean, dry cloth.
Regularly clean the ironing board cover: •
- Remove the ironing board cover from
the ironing board (5).
- Wash the ironing board cover by hand
(max. 30 °C) using a mild detergent.
- Allow the ironing board cover to dry
naturally.
- Put the ironing board cover over the
ironing board (5).
Storage (fig. A - C)
Make sure that the water reservoir (8) is •
empty and placed into the appliance.
Lower the pressing plate (6).
•
Turn the locking knob (7) into the direction •
of the lock symbol to lock the pressing
plate (6).
Put the mains cable in the storage
•
compartment (9).
Put the appliance and the accessories in
•
the original packaging.
Store the appliance with the accessories in
•
a dry and frost-free place, out of the reach
of children.
Safety instructions
General safety
Read the manual carefully before use. Keep •
the manual for future reference.
Only use the appliance and the accessories
•
for their intended purposes. Do not use the
appliance and the accessories for other
purposes than described in the manual.