Princess 182001, Manual, Page: 10 / 72

10
EN
Use
Switching on and off (fig. A)
The appliance is equipped with a thermostat
that keeps the oil or the liquid fat at the
required temperature.
Before you proceed, we need you to pay
attention to the following notes:
- Do not use the appliance when the removable
pan is not filled with oil or liquid fat.
Insert the mains plug into the wall socket. •
To switch on the appliance, turn the •
thermostat dial (2) to set the required
temperature. The temperature indicator
(3) remains on while the thermostat heats
the oil or the liquid fat. The temperature
indicator (3) goes off when the oil or the
liquid fat has reached the required
temperature.
While the appliance is switched on, the
•
temperature indicator (3) will illuminate and
extinguish as the thermostat switches on and
off to maintain the required temperature.
To switch off the appliance, turn the
•
thermostat dial (2) to the off position.
Make sure that the dots on the thermostat
dial (2) and the electronic control unit (1)
are aligned. The temperature indicator (3)
goes off.
Remove the mains plug from the wall socket. •
Setting the temperature (fig. A)
The temperature can be adjusted from 150 °C
to 190 °C.
Turn the thermostat dial (1) to set the •
temperature. The temperature indicator
(3) goes off when the oil or the liquid fat
has reached the required temperature.
Deep-frying temperature
Food
Temperature (°C)
Chips (pre-frying) 170
Chips (final frying) 175
Parmesan fondue 170
Cheese croquettes 170
Potato croquettes 175
Meat croquettes 175
Fish croquettes 175
Fish 170
Fish fingers 180
Cheese fritters 180
Prawn fritters 180
Minced-meat hot dogs 180
Chicken 170
For the best fresh chips, it is recommended to
proceed as follows:
- Deep-fry the chips at 170 °C for 5-10 minutes.
Shake the basket to loosen the chips. Allow
the chips to cool down in a bowl for a short
period.
- Deep-fry the chips at 175 °C for 2-4 minutes.
Shake the basket to loosen the chips. Allow
the chips to cool down in a bowl for a short
period.
Resetting the appliance (fig. A)
If the appliance does not function properly or
if an error occurs, the appliance can be reset.
Press the reset button (4) on the electronic •
control unit (1) to reset the appliance. Use
the reset stick (5).
Hints for use
Place the appliance on a stable and flat •
surface.
Assemble the appliance. Refer to the
•
section "Assembly".
Fill the removable pan with oil or liquid fat.
•
Make sure that the oil/liquid fat level is
between the minimum mark and the
maximum mark on the removable pan (fig. C).
Insert the mains plug into the wall socket.
•
Set the required temperature. Consult the •
food packaging for the required
temperature and the required time.
The temperature indicator goes off when
the oil or the liquid fat has reached the
required temperature.
Allow the appliance to pre-heat for
•
approximately 15 minutes with the oil or
liquid fat at the required temperature.
Remove ice from frozen food and dry the
•
food to avoid splashing of hot oil or liquid fat.
Fill the basket with the food.
•
Place the basket into the appliance. •
Place the lid onto the appliance. •
If the process is completed, remove the lid •
and the basket from the appliance.