14.
Do not
use carbonated liquids in the Jar as this may result in injury.
15.
Do not
pour boiling water or any hot liquid into the Jar.
16.
Do not
blend any liquids for more than 7 minutes, as the motor is designed to shut off after
that time to allow for cooling.
17. If food stops circulating, you may need additional liquid. Press the button of the function you
are using or turn dial to OFF. Remove Jar from Base, use a spatula to move food away from
blades, and add more liquid if needed. Return Jar to Base, replace Lid, and continue blending.
18. This blender can be used outdoors if under a patio roof or other enclosure to prevent any
rain, snow or moisture from coming into contact with it.
Do not
leave the blender outdoors
when not in use.
19. Always operate blender with Lid and Cap firmly in place. The Measuring Cap should be
removed only when adding ingredients or to use the Tamper.
20. The Tamper provided should only be used with the Lid in place.
21. Always operate blender with Removable Jar Pad properly in place.
22.
Do not
fill Jar above MAX LINE.
23. If the Jar overflows during blending, stop the blender and remove liquid/ingredients to below
MAX LINE, then continue blending.
Do not
operate if the Jar is overflowing.
24.
Do not
operate your appliance in areas with unfinished walls and exposed electrical cords.
Doing so could create a risk of fire.
25. Ensure the bottom of the Jar is aligned and engaged with the motor coupling before
operating. If unable to engage, remove the Jar and try again.
26. The motor coupling may be hot after running –
do not
touch.
NOTE:
When using preset buttons, the blender needs to cool off for 5 minutes between cycles.
Example: SOUP function runs for 7 minutes. Allow blender to cool before using it again.
TO RESET THE UNIT
Your blender is equipped with a
Thermal Protector to protect the motor
. If the motor shuts
down, unplug the blender. Let the blender rest for approximately 15 minutes. Plug the power cord
back into the outlet; if LED lights do not come on, press the Main Power Button located on back
of Base. LED lights will illuminate on the front panel, and then you may continue blending.
Please Note:
LED lights will only illuminate when the blender dial is in PROG MODE and Jar
is placed on Base of blender. Lights do not illuminate if dial is in Manual Mode, turned to OFF
position, or when Jar is not on Base.
If your blender does not function properly following this procedure, contact Princess House
Customer Service at 508.823.6800 for additional information.
3
