READ AND FOLLOW ALL ASSEMBLY, OPERATING,
AND SAFETY INSTRUCTIONS CAREFULLY. AT LEAST
TWO (2) ADULTS ARE NEEDED TO PUT THIS TABLE
TOGETHER!
3.
Attach four Strut Tubes (
#4
) to Caster Beam Assembly
with four Carriage Bolts (
#10
) and four Locknuts (
#14
)
as shown in
FIGURE 3
. Tighten nuts snug but
DO NOT
Parts Needed:
4 pcs -
#4
Strut Tube
Hardware Needed:
4 pcs -
#10
Carriage Bolt
4 pcs -
#14
Locknut
4
Figure 3
10
4
14
NOTE:
Snug, but
DO NOT
over-tighten these four pivot points.
over tighten.
Summary of Contents for T8870
Page 9: ...9...
