background image

 

981-500 RevA-EN 

 

Printed in USA 04/18 © 2018 

 

 

 

 

LIMITED WARRANTY 

This product is warranted to be free from defects in material 
and/or workmanship for a period of one (1) year from date of 
original installation, not to exceed 18 months from date of 
shipment from our factory 

with the exception of the 

blade/pusher cartridge

. Blade/pusher cartridge is warranted to 

be free from defects at time of delivery only. 

Any component which proves to be faulty in material and/or 
workmanship will be replaced or repaired (at the option of 
Prince Castle LLC) without cost (including freight and duty) to 
the customer for parts or labor. 

This warranty is subject to the following exceptions/conditions: 

  Use of food products other than those specified will void this 

warranty. 

  This equipment is portable; charges for on-location service 

(e.g., trip charges, mileage) are not included in the provisions 
of this warranty. 

  Damage caused by carelessness, neglect, and/or abuse 

(e.g., dropping, tampering or altering parts), equipment 
damaged in shipment, by fire, flood or an act of nature is not 
covered under this warranty. 

 

 
 

 

355 East Kehoe Blvd. 

 Carol Stream, IL 60188 USA  

Telephone: 630-462-8800 

 Toll Free: 1-800-PCASTLE  

Fax: 630-462-1460 

 www.princecastle.com 

TABLE OF CONTENTS 

Safety Information ...................................................................... 2

 

Description ................................................................................. 2

 

Specifications ............................................................................. 2

 

Installation .................................................................................. 2

 

Choosing and Inserting a Cartridge ........................................... 3

 

Operation ................................................................................... 4

 

Removing a Cartridge ................................................................ 5

 

Inspecting Blades and Pushers .................................................. 5

 

Cleaning ..................................................................................... 5

 

Exploded View and Parts List .................................................... 7

 

Revision Log .............................................................................. 8

 

 

 

 

 

 

 

 

 

Original Instructions 

Operating Instructions 

 

Universal Slicer 

Saber King™ Mini 

Chassis & Blade Sets 

981-000-00 

Chassis 

981-000-12A   1/4" Tomato Slicer 

981-000-20A   3/16" Onion 

981-000-50A   1/4" Dicer 

981-000-51A   3/8" Dicer 

981-000-52A   1/2" Dicer 

981-000-60A   4 Sections Wedger 

981-000-61A   6 Sections Wedger 

981-000-62A   8 Sections Wedger 

981-000-65A   Citrus Halfer 

Handle Latch 

Handle

 

Chassis 

Pusher Component 

of Blade/Pusher 

Cartridge

 

Cartridge 

Locking Pin 

Blade 

Component 

Palm Rest

 

Summary of Contents for Saber King Mini









Reviews: