970-506revB-EN
3
Printed in USA 1/07 © 2007
5.
Grasp the white pusher plate handle and push the
bagel through the blades with a quick, firm stroke
until it is completely sliced. See
figures 5
and
6
.
figure 5
figure 6
6.
Sliced bagel will exit the unit from the rear
opening. See
figure 7
.
figure 7
REPLACING BLADES
CAUTION
Blades are extremely sharp. Keep fingers away from
blades.
IMPORTANT:
For safety, it is important to remove and
discard one blade at a time.
1.
Turn unit over.
2.
Remove first blade by unscrewing the two
thumbscrews holding blade to base assembly.
3.
Carefully slide blade out through side slot and
discard blade.
4.
Remove second blade by repeating steps 2
and 3.
5.
To install first blade, slide sharp edge of blade
through side slot. Align holes and tighten with two
thumbscrews.
6.
Repeat step 5 to install second blade.
CLEANING
CAUTION
Blades are extremely sharp. Keep fingers away from
blades.
1.
Spray slicer with hot water to remove any bread
crumbs or residue.
2.
With hot, soapy water, scrub slicer and blades
using a nylon brush.
3.
Rinse slicer with hot water.
4.
Let air dry.
DAILY MAINTENANCE
IMPORTANT:
After every washing be sure to lubricate
the Guide Rods using Petro-Gel or Taylor Lube.
IMPORTANT:
Be sure to check the blade screws for
tightness, if loose use pliers to tighten.
