![Primus PW 5 Installation And Maintenance Manual Download Page 35](http://html1.mh-extra.com/html/primus/pw-5/pw-5_installation-and-maintenance-manual_1602152035.webp)
34
1
2
TUMBLE DRYER
MAINTENANCE
MAINTENANCE
MAINTENANCE INTERVAL
Clean the outside of the machine
As necessary or when cleaning
the laundry room.
Clean the fan
At least once a year
Clean the condenser
Approx. 6 times a year
Clean the lint filter and lint filter holder
After each tumble drying
Maintenance chart for tumble dryer.
CLEANING THE LINT FILTER HOLDER
Dust and dirt can gather in the bottom of the
lint filter holder. Take out the lint filter and use
a vacuum cleaner to clean the filter holder.
1
. Grasp the filter handle
and pull it towards
you.
2
. Slide the filter out
of the filter holder.
3
. Open the filter and
rub off any lint with
your hand. Rinse out
the filter to
remove
any li-
mescale
deposit.
4
. Fold
the filter
and put it
back in the filter holder.
IN AREAS WITH HARD WATER
If the machine is installed in an area that has
hard water this can produce a limescale deposit
on the lint filter.
When you clean the lint filter check if there
is any limescale deposit. If there is, wash out the
lint filter by hand.
EMPTYING THE CONDENSATION WATER TANK
(only applies to condenser tumble dryer, when
drain hose isn’t used)
Empty the condensation water
tank after each tumble
drying.
Pull out
the conden-
sation water
tank, empty
the water and put the tank back.
If the tank becomes too full the program will
be interrupted. Empty the tank and press the
-button and the program will continue
from where it was interrupted.