Primus PRI20001 User Manual And Product Specifications Download Page 7

User Manual and Product Specifications

7

NothINg haPPeNs wheN I PRess the 

swItch buttoN

1.   Check if the appliance outer suction or seal ring 

are loose or not assembled, If yes, tighten or 
change them.

NOTE: If the appliance has not been used for a 
long time or is new, the battery power may be weak. 
Please fully charge before use.

the chaRgeR wIll Not chaRge

1.   Check whether the LED indicator of the unit lights 

up. If not, check if the unit and the charge stand 
have a bad contact. you can use a dry cloth to 
mop the silver conductor plates of the unit.

2.   Check the mobile charger’s rating, if the output 

current is below 2a, please use correct one.

fully chaRged but Not woRkINg

1.   Make sure, if the LED indicator lights up during 

charging, if not, check if the vacuum sealer and 
charger are connected.

2.   If the LED indicator lights up during charging, 

make sure the charging time is sufficient. 

aIR Is Not Removed fRom the bag 

comPletely

1.  

Bag is not sealed, open up the seal, wipe clean 
and close again.

2.   Replace the zip bag, make sure the valve is clean.

3.   Extend the vacuuming time.

4.  Change bag as there may be a hole in the bag.

NOTE::We recommend you to use the vacuum bags 
designed specifically for use with this appliance to 
achieve perfect vacuum performance. 

Troubleshooting

EnVIRonMEnT PRoTECTIon FIRST 

1.  

The symbol on the product and on its packaging 
indicates that this product may not be treated as 
household waste. Instead it should be handed 
over to the applicable collection point for the 
recycling of electrical and electronic equipment.

2.   By ensuring this product is disposed of 

correctly, you will help prevent potential negative 
consequences for the environment and human 
health, which could otherwise be caused by 
inappropriate waste handling of this product.  
For more detailed information about the recycling 
of this product, please contact your local council 
office or your household waste disposal service.

Disposal of the device

Technical details

Specifications

Power Source

Lithium–ion Battery
2000 maH

USB

5 V, 2.0 a

Power

7 W

Dimensions

17L cm x 9.8W cm x 5.3H cm

Vacuum Speed

8 L/min

Max Vacuum pressure -0.7 bar
Machine weight

360g (gross)

For more information call our customer  
service hotline 1300 555 197 
Email: [email protected]

Summary of Contents for PRI20001









Reviews: