background image

SAFETY RULES

If unit is to be used by someone other than 
original purchaser; loaned, rented or sold, 
ALWAYS provide this manual and any 
needed safety training before operation.

Only the user can prevent and is responsible 
for accidents or injuries occurring to 
themselves, other people or property.
Read, understand, and follow all instructions 
in the manual and on the machine before 
starting.

Understand:

How to operate all controls

The functions of all controls

How to STOP in an Emergency

ALWAYS remove spark plug wire from spark 
plug before inspecting or working on this unit.
Inspect unit before each use for: missing or 
damaged decals and shields. Replace or 
repair as needed.

Before starting engine ensure that control 
lever is in neutral position.

Keep children, people, and pets away. Be 
alert and shut off unit if anyone enters work 
area. Keep children under watchful care of a 
responsible adult.

NEVER allow children to operate or play on 
or near unit.

Keep operator zone clear of all split logs and 
debris.
Operate unit only when there is sufficient light 
to clearly see work area.

Only trained adults may operate unit. Training 
includes being familiar with controls and 
actual operation.

Many accidents occur when more than one 
person operates the log splitter. If a helper is 
assisting in loading logs to be split, never 
operate the controls until the helper is clear of 
the area.
NEVER operate unit after or during the use of 
medication, drugs or alcohol. 

NEVER allow anyone to operate this unit 
when their alertness or coordination is 
impaired.

Wear adequate safety shoes and protective 
gloves. 
DO NOT wear loose clothing or jewelry and 
tie back hair that may get caught in moving 

parts.

Protect eyes, face and head from objects that 
may be thrown from unit. Wear appropriate 
hearing protection. Always wear safety 
goggles or safety glasses with side shields 
when operating. 

ALWAYS keep hands away from all moving 
parts during operation. Moving parts can cut 
or crush body parts.
ALWAYS keep hands away from all pinch 
points.

Operate unit only when standing in operator 
zone. Unit stabilizers must be extended 
before starting unit.

DO NOT touch unit parts which might be hot 
from operation. Allow parts to cool before 
attempting to maintain, adjust or service. 
ALWAYS stop unit and allow moving parts to 
stop before leaving operator zone. Do not 
leave running unit unattended.

DO NOT operate in the rain or in wet or damp 
locations. Assure that operator zone is free or 
debris and provides good footing.

Know the weight of logs. Limit logs to those 
you can safely control and the unit can safely 
handle.

Do not use log splitter for any purpose other 
than splitting logs.

Do not move the unit up or down a hill by 
hand. Use a tow vehicle with suitable braking 
system.

Use extra care when towing unit. DO NOT 
exceed 45 mph (72.4 kph).

Safety chains MUST be attached to vehicle 
when towing unit.
NEVER allow anyone to ride on the unit.

NEVER transport cargo on the log splitter

Check local, state and federal laws before 
towing. Any modifications required to meet 
these laws are the responsibility of the 
purchaser.
ALWAYS stop engine, lock beam in horizontal 
position and close fuel shut-off valve when 
transporting unit.

Keep unit free of leaves and other debris. DO 
NOT spray water to clean unit. 

4

Summary of Contents for HCWP1- 26











Reviews: