4
6. You are now ready to install your brand new Primus PHS-250 (ARCUS 250S) Gaming Headset.
Once you click
Install
, the system will ask you to connect the headset to a USB port on your PC.
7.
Module interface connection
You must use the module to install the software, and also to enable the 7.1 channel sound effect.
To do so, follow steps from 1 to 6 included in the card.
ARCUS
250S
MODULE INTERFACE CONNECTION
3.5MM JACK (TRRS)
INPUT/OUTPUT
INSERT THE 3.5MM CABLE
FROM YOUR PHS-250
USB PORT 1
CONNECT HERE THE
USB CABLE FROM THE
PHS-250
USB CABLE FROM MODULE
CONNECT IT TO AN
AVAILABLE USB PORT ON
YOUR PC
HEADPHONE OUTPUT (TRS)
INSERT THE 3.5MM CABLE
FROM A SECONDARY
HEADPHONE, IF NEEDED
MICROPHONE INPUT (TRS)
INSERT THE 3.5MM CABLE
FROM A SECONDARY
HEADPHONE, IF NEEDED
USB PORT 2-PASS-THROUGH
FOR POWER AND DATA
CONNECT HERE THE USB CABLE
FROM A SECONDARY
HEADPHONE, IF NEEDED
2
3
4
5
6
1
6
2
5
3
4
1
NOTE: IF A HEASET WITH ONLY USB CONECTOR IS PLUGGED INTO THE
MODULE'S USB PORT 2, THE AUDIO WILL BE RE-DIRECTED TO THAT HEADSET.
• Once the connection is stablished, the configuration of the device will start in your PC. To
proceed, follow the prompts on the screen.
