Primus ARCUS200S-BT, User Manual

Page: 6 / 16

6
MULTIFUNCTION COMMAND
SINGLE TAP
DOUBLE TAP
TRIPLE TAP
VOICE ASSISTANT INTERFACE
SOUND EFFECTS
LED STATUS INDICATOR
Function
Left earbud (L) will cause the volume to decrease
Right earbud (R) will cause the volume to increase
Once the highest or lowest audio level is reached, a single tone will be generated
through the earbuds
When in phone mode:
- Play/pause media
- Answer /hang up a call
Left earbud (L) will play previous track
Right earbud (R) will play next track
Press and hold the left earbud (L) for 2 seconds to activate Google Assistant or Siri (on
supported devices).
To cancel this function, press and hold the same control again for 2 seconds.
A tone will be heard every time the voice recognition feature is toggled on or off
Press and hold the right earbud (R) for 2 seconds to enter the low latency mode.
The LEDs on the earbuds will glow, accompanied by the Game mode prompt to notify
that it has been switched on. Likewise, Music mode will be heard when pressing and
holding the right earbud (R) once more for 2 seconds in order to enable this option
STATUS
POWER ON
POWER OFF
PAIRING
GAMING MODE
LOW BATTERY
EARBUD CHARGING
CASE CHARGING
Function
LEDs on both earbuds light up 3 times accompanied by a voice prompt
LEDs on both earbuds light up once accompanied by a voice prompt
LEDs will blink once per second
Turns on the breathing light effect on both LEDs
Both LEDs blink simultaneously every two seconds
Open the case to place earbuds inside the compartment.
The LEDs on the case will glow for 10 seconds. Close the cover to start charging. The
LED on each earbud flashes when charging, and turns off when the built-in battery is
fully charged
When battery power is less than 25%, both LED indicators light up once simultaneously
When battery power is between 25% and 50%, both LED indicators light up twice
simultaneously
When battery power is between 50% and 75%, both LED indicators light up three times
simultaneously
When battery power is between 75% and 100%, both LED indicators will turn to solid
purple