Instruction Manual
5
Available in 3 models. Heating and suction (Eco DOB), heating, suction and blowing (Eco DOB S+B) and
E Model (Heating-suction Eco DOB E, Heating-suction-blowing Eco DOB E S+B
)
E Version: The E Version has a specialized PC Board that controls and regulates the power consumption
of the Ironing Table. In using the E Version you receive optimal performance and stability in suction with
the lowest possible energy use. The test results have showed gain in energy savings up to 40%.
2.4
Technical Characteristics
Model
Eco DOB
Eco DOB S+B
Eco DOB E
Eco DOB E S+B
Height adjustment
85cm
85cm
85cm
85cm
Heating power
1KW
1KW
1KW
1KW
Suction power
0.50HP
0.50HP
0.50HP
0.50HP
Blowing power
NO
0.27HP
NO
0.27HP
Power Supply
230V
230V
230V
230V
3.
General rules and Warnings
3.1
General rules of using the Ironing Table
For the safe usage of your Ironing Table, please read the following operating instructions carefully, as
listed below:
Install, use and maintain the Ironing Table according to the instructions in this manual.
Otherwise, the manufacturer has no responsibility for the possible failed operation or safety.
Before connecting the power supply, check that the voltage corresponds to the voltage indicated
on the technical specifications.
Connect the machine only to a power supply that meets the minimum required frequency and is
properly grounded. Do not leave the Ironing Table while it is operating and is on power without
supervision.
Use the Ironing Table ONLY for the intended purpose in accordance with the current instruction
manual and only with the accessories that are provided or that are intended for this specific
Ironing Table. The manufacturer is not liable for any damages resulting from misuse or wrong
use of the Ironing Table.
DO NOT touch the power supply with wet hands.
Do not clean the Ironing Table with corrosive or other damaging materials/chemicals.
Never use the Ironing Table to support any other machine or structure.
It is strictly prohibited to do any kind of welding or alterations on the Ironing Table or its
parts.
It is strictly prohibited to remove any protective device/guards.
It is strictly prohibited to intervene in the control units/circuit boards of the Ironing Table.
It is strictly forbidden to do any modification to the technical specifications of the machine
(electrical or mechanical) by third persons.
Please contact your dealer or the manufacturer for any malfunction or further information
requests
3.2 Warning marks placed on the Ironing Table
The following attention marks are placed on each ironing table:
