Primrose CAN0025, Assembly Manual

Page: 2 / 19

● We strongly recommend the use of work gloves during assembly.
● Always wear shoes and safety goggles when working with extruded aluminium.
● Dispose of all packaging materials and plastic bags safely - keep out of reach
of children and babies to avoid risk of suffocation.
● Keep children away from the assembly area.
● The Veranda - Garden Canopy must be positioned and fixed on a flat level surface.
● Do not attempt to assemble the Veranda - Garden Canopy in windy or wet conditions.
● Do not position your Veranda - Garden Canopy in an area exposed to excessive wind
● Do not touch overhead power cables with the aluminium profiles.
● Ensure there are no hidden pipes or cables in the ground before inserting the pegs.
● Do not lean against or push the Veranda - Garden Canopy during construction.
● Do not attempt to assemble this Veranda - Garden Canopy if you are under the
influence of drugs or alcohol, tired or if you are prone to dizzy spells.
● When using a step ladder or power tools, ensure that you follow the
manufacturer's safety advice.
● Hot items such as recently used grills, blowtorches, etc must not be
stored in the Veranda - Garden Canopy.
● This is a multi-part assembly; Allow at least 200 minutes for assembly.
● When selecting an assembly site, choose a sunny and level position
away from overhanging trees.
● Surface of the assembly site needs to be level.
● If you are fixing your Veranda - Garden Canopy directly to a solid concrete
foundation, use the pre-drilled holes in the metal base supplied.
● All component parts should be checked and laid out close at hand.
● Keep all small parts (screws, fixings etc) in a bowl so they do not get lost.
● When cleaning your Veranda - Garden Canopy, use soft cloth or sponge
and mild household detergent solution. Rinse with lukewarm or cold clean water.
● Do NOT use acetone, abrasive cleaners or other special detergents to clean the
clear panels.
● Do NOT scrub with brushes or abrasive materials as it can cause damage to
the surface.
● Keep roof clear of snow and leaves.
Tools & Equipment Required
Protective Equipment
1.Helmet
2.Glove
3.Long Sleeve CottonOveralls
4.Emergency First Aid
5.Eye Shield
Measure(metric):
1.The Tape(5 m)
2.Angle Square
3.Level Meter
Installation Tool:
1.Triangle Stairs
≈
1.5m Height
2.Spanner 10mm(Ratchet Wrench is better)
3.Spanner 14mm(Install the expansion screw)
4.Hexagon wrench 5mm
5.Electric scre5mm Hexagon wrench(suggest)
6.Wooden Mallet
7.Marking Pen
8.Silicon
9.Percussion bit(8mm and 10mm)
10.Knife
11.Phillips screwdriver
Silicone