CONTROLS
7
CONTROLS
“SEL” FOOT SWITCH
The “SEL” footswitch is used to select one of the input channels.
This switch will cycle through the input channels when engaged.
A miniature rocker switch located on the rear panel allows you to
select the maximum number of inputs for cycling. Select 2, 3 or 4
guitars.
This allows you to use a mix of up to four GK equipped and/or
regular guitars on stage easily selectable with a stomp of your
foot.
“A/B” FOOTSWITCH
This is the pedal switch that allows you to select which device is to
be played, either the one connected to the A connector, or the
one connected to B.
The red LED is ON – Unit A will sound and the S1 and S2 buttons
located at the guitar is routed to unit A.
The green LED is ON – Unit B will sound and the S1 and S2 buttons located at the guitar is
routed to unit B.
“BOTH” FOOTSWITCH
When switched ON, this foot switch allows you to play both of
the devices connected to the A and B connectors at the same
time.
The yellow LED is ON – Both units will sound. This setting does
not affect the S1/S2 routing.