BLIND SET UP INSTRUCTIONS
The CLUB
™
Model No. 65100
, The CLUB
™
XL
Model No. 65101,
The CLUB
™
XXL
Model No. 65102
WARNING: Read all instructions and safety warnings and
follow them thoroughly. Failure to follow these instructions
may result in serious injury or death!
STEP 1: Remove your blind from the carry bag and unclip the
tie strap. (fig. 1)
STEP 2: Spread the corners of the blind out (fig. 2) and flip it
open so you see the center hub on the top of the blind.
STEP 3: Firmly pull the cord attached to the center hub until
the top pops out. (fig. 3)
STEP 4: Lift the top of the blind so you have access to the
center hub on one of the walls and firmly pull the hub
until the wall pops out. (fig. 3 & 3a)
STEP 5: Continue around the blind, pulling the hubs one at a
time until all of the walls are set up.
Your blind should now be standing square.
STEP 6: Use stakes to secure your blind to the ground.
(fig. 4)
STEP 7: Adjust the windows to your liking. Add native brush
to your blind to optimize your camouflage. (fig. 4)
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
Models:
The CLUB
™
, The CLUB
™
XL
& The CLUB
™
XXL
Shown using Brush Deception
™
loops for added concealment.
FIGURE 3a
Detail of center hub ring from
the outside of the blind.
Pulling on the center hub
cord will expand blind top
and walls.
For Replacement Parts Visit us online at: www.primos.com
