Remote Operation: Connecting Caller
First time connection: The first time you use your new Primos electronic predator call
you will need to install and power on the controller by pressing and holding the power
button for three seconds. Once the remote is powered on you will select go! In order
to add Speaker. You will then be directed to power on your speaker.
Once the remote finds the speaker within range you will select the speaker by hitting
Enter. You then have the opportunity to name this device for future identification.
EX: Top Dogg 09
–
Name
“TDogg”
once you have named your device select enter, and
then submit. The device will automatically sync the remote in order to activate sounds.
Once the electronic caller is connected to the remote you will see the caller icon in the upper left corner.
Important Note: The Primos remote can pair up to three speakers to one remote simultaneously. This will
be indicated on the screen by each line.
In order to understand which device is connected, you will see an arrow on the left side of the screen
before the speaker icon.
Summary of Contents for Horn Dogg
Page 19: ......
