3
remote in the cavity. The
connection is magnetic and will
hold the remote in place for
storage.
NOTE: Remote has built in belt
loop hook. Utilize for easy access
when in the field
SPEAKER PLACEMENT
Place speaker within 150 yards of your location. Position the speaker facing away from your location
in order to get maximum range with the sound. Hunting Tip: Keeping speaker within 50 yards allows
for closer shots. Also place speaker to side of your location so animal is looking to the side of you and
not in direct alignment with you.
IMPORTANT NOTE: If speaker is placed at long distances, on the ground, in thick cover, in under
brush, or has obstructions between remote and speaker always check remote function with speaker.
If remote does not operate speaker, raise speaker off ground or decrease speaker distance.
CARING FOR YOUR CALLER
Your caller contains sensitive electronic components that can be permanently damaged if exposed to
excessive shock or vibration. To minimize the risk of damage to your unit, avoid dropping your unit
and operating it in high-shock and high-vibration environments.
-‐
Do not store your unit where prolonged exposure to extreme temperatures can occur,
because it can cause permanent damage.
-‐
Do not expose to prolonged exposure to moisture. This can cause this unit to malfunction.
-‐
Never use a hard or sharp object to operate this unit or damage may result.
Cleaning the Unit:
The Dogg Catcher
TM
Caller is constructed of high-quality materials and does not require user
maintenance other than cleaning. Clean the outer casings using a cloth dampened with a mild
detergent solution, and then wipe dry and allow to air dry.
Avoid chemical cleaners and solvents that can damage plastic components or soft-touch coating.
Caution: The caller is water resistant - not waterproof.
TROUBLE SHOOTING
Check batteries in speaker and remote control if caller is not functioning properly.
Remote is not controlling speaker properly. Move remote closer to speaker until remote properly
controls speaker.
If speaker continues to function incorrectly, call Customer Service at 601-879-9323 or email
.
FCC STATEMENT
Changes not expressly approved by Primos could void the user's authority to operate the equipment.
