①
、
Control plate: Rabbit stands for high speed, Turtle stands for low speed, Clock stands
for timer, Hand stands for manual, and Arrowhead stands for reverse.
②
、
Safety guard
③
、
Bowl
④
、
Cover
⑤
、
Protective wheel
⑥
、
Switch
⑦
、
Body
⑧
、
Support
⑨
、
View Hole Cover
Operation Instruction
The machine has two controls: touch-panel control and manual-switch control
1. Touch-panel control
A. Put the materials into the bowl. Note that sufficient quantity is 55% of bowl volume with
flour and water.
B. Automatic manner: switch on power supply; set 3-4 minutes at low speed, 7-8 minutes at
high speed, and press “manual/automatic switch” to automatic state (“AUTO” light became
light on the panel). Then press “ON” to turn on the machine, the machine will mix the flour at
one time.
C. Manual manner: switch on power supply, press “manual/automatic switch” to manual
state (“Manu” light became light on the panel). Press “quick/slow switch” at low speed, and
press “ON” switch to start mixing at low speed, and to some extent, press “quick” mixing
switch to complete mixing.
D. Take out paste after mixing. If turn on the face guard during mixing, then the machines
will stop rotating. In this case, press “INCH” switch, then the machine can operate, and the
paste can be taken out.
2
、
Manual-switch control
The machine has manual switch at the left side, “1” is slow speed, and “2” is quick speed.
The switch can be turn to the required speed when using, and press the button beside the
switch.
In the process of manual operation, the power supply of panel is turn off. If you want to use
