background image

Model # 900162: Page 2 

 

 

SAFETY PRECAUTIONS 

 

 

 

To reduce risk of injury and property damage, user must read this entire 
manual before assembling, installing & operating dispenser.  

Failure to execute the instructions in this manual can cause personal injury 
or property damage. 

This product dispenses water at very high temperatures. Failure to use 
properly can cause personal injury. 

When operating this dispenser, always exercise basic safety precautions, 
including the following: 

!

 

Prior to use, this dispenser must be properly assembled and installed in accordance with 
this manual. 

!

 

This dispenser is intended for water dispensing only. Do NOT use other liquids. Do NOT 
use for other purposes. Never use any other liquid in the dispenser other than known 
and microbiologically safe bottled water. 

!

 

For indoor use only. Keep water dispenser in a dry place away from direct sunlight. Do 
NOT use outdoors. 

!

 

Install and use only on a hard, flat and level surface. 

!

 

Do NOT place dispenser into an enclosed space or cabinet. 

!

 

Do NOT operate dispenser in the presence of explosive fumes. 

!

 

Position back of dispenser no closer than 4 inches from wall and permit free airflow 
between wall and dispenser. There must be at least 4 inches clearance on the sides of 
the dispenser to permit airflow. 

!

 

Use only properly grounded outlets.  

!

 

Do not use an extension cord with your water dispenser. 

!

 

Always grasp plug and pull straight out from outlet. Never unplug by pulling on power 
cord. 

!

 

Do NOT use dispenser if cord becomes frayed or otherwise damaged. 

!

 

To protect against electric shock, do NOT immerse cord, plug, or any other part of cooler 
in water or other liquids. 

!

 

Ensure dispenser is unplugged prior to cleaning.

 

!

 

Never allow children to dispense hot water without proper and direct supervision.  
Unplug unit to prevent unsupervised use by children. 

!

 

Service should be performed only by a certified technician. Please contact us at        
866-429-7566 for assistance. 

Summary of Contents for 900162













Reviews: