Primex XR 30 Watt Install & Operation Manual Download Page 54

Page: 54 / 56

4. Press the right arrow

button once. The display will show when the error was logged. Note the time and data of the

error.

5. Press the right arrow

button once.

6. Display will read: “Clear all errors?. Press the right arrow

button once.

7. “Yes” and “No” are displayed with a selection arrow.

Selecting "Yes" followed by the pressing the ENTER button clears the errors.

Selecting “No” followed by pressing the ENTER button cancels the process and takes you back to the main menu.

8. Wait several seconds for the time/date to be displayed.

NOTE

If the LEDs continue to flash, repeat procedure as there may be additional errors to be cleared. If same errors continue to

be logged, additional troubleshooting may be required. For further assistance, contact Primex Technical Support at 1-

262-729-4860.

XR 5 Watt & 30 Watt Transmitter Install & Operation Guide

Summary of Contents for XR 30 Watt

























































Search results

Summary of Contents for XR 30 Watt

Reviews:

Related manuals for XR 30 Watt

Brands by name

Popular brands

Primex XR 30 Watt, Install & Operation Manual

Search results

Summary of Contents for XR 30 Watt

Reviews:

Related manuals for XR 30 Watt

Brands by name

Popular brands