STEP 2
STEP 1
STEP 4
Removing Gateway from Holder
STEP 3
STEP 2
STEP 1
STEP 3
Insert Wall Mount Screw
Locate stud and mark location on wall where
Gateway will be placed and drill included screw.
Insert Gateway into Holder
Place in desired position.
Secure Gateway
Snap second holder on top of Gateway into
place, supporting bottom of bracket with hand.
Release Cavity
Using a flat head screwdriver,
place under the release cavity.
Release Cavity
Once in the release cavity, twist the screwdriver.
Repeat placing screwdriver at the top on opposite side.
Remove Cover
Remove top of holder to
access Gateway.
Install Gateway Holder
Secure one holder into slot.
Affix with second screw.
GB7 GATEWAY MOUNTING VIDEO:
Gateway Mounting Bracket (GB7)
P/N 125-1875
PRIMEX
Installation Instructions: On Wall
