Install Bluetooth Personal LCD Clock: Tabletop or wall mount
Refer to the Important Safety Instructions before installing, operating or performing maintenance of clocks.
Location guidelines
When identifying the install location of a Bluetooth device, the following guidelines should be followed to ensure a
device as adequate Bluetooth wireless signal strength.
• 100 ft. (30 m) when in clear-line-of sight to another Sync Bluetooth device
• 50 ft. (15.2 m) when there is 1 internal wall between Sync Bluetooth devices
• 30 ft. (9.1 m) when there are 2 internal walls between Sync Bluetooth devices
You can also measure the Bluetooth signal strength at an installation location to determine if the location has adequate
Bluetooth signal strength.
Battery use recommendations
Battery life expectancy is based on common operating conditions and may vary due to installed site conditions and
settings. Sync Bluetooth battery-operated clocks and repeaters have up to a five year battery life.
• Use only new high-quality name brand alkaline batteries
• Use batteries with expiration date five or more years beyond the installation date
• Use batteries with the same type and date code
• Do not use heavy duty and zinc carbon batteries as they will not last as long as high-quality name brand alkaline
batteries
• Do not use rechargeable NiCad batteries, as their output voltage is too low to assure proper operation
• Do not use standard lithium batteries
• Battery level is monitored by OneVue. Batteries should be replaced promptly upon reaching low battery status to
maintain performance and reduce the risk of battery leakage due to excess discharge.
Tabletop mount
The Personal Series LCD Clock has an easel stand located on the back of the clock.
Page 6
