FocusMonitor FM+
35,0(6
54
Revision 03/2019 EN
18.6
Replace the detector
Generally, the FocusMonitor FM+ is equipped with a DFIG-PS+ or DFC+ detector (see Fig. 18.5 on page
54). Detectors with different sensitivity or different time behavior can be used for special applications.
More information regarding the variety of detectors to ensure an optimum configuration of the
FocusMonitor FM+ is provided in the Tab. 18.1 on page 47.
NOTICE
Damage of the detector
Touching the sensor surface will damage the detector. This can negatively affect the measur-
ing results.
X
Do not touch the detector with your fingers on the sensor surface.
X
Don’t set the detector on the sensor surface.
Sensor surface
Fig. 18.5:
Sensor surface on the detector
