BeamMonitor BM+
35,0(6
13
Revision 02/2019 EN
6
Transport
NOTICE
Damage/Destruction of the device
Optical components may be damaged if the device is subjected to hard shocks or is allowed
to fall.
X
Handle the device carefully when transporting or installing it.
X
To avoid contamination, cover the apertures with the provided lid or optical tape.
X
Only transport the device in the original PRIMES transport box.
7
Installation
7.1
Safety instructions
Areas on the device that could be particularly hazardous for hand injuries are marked with the following pic-
togram:
Hand injuries warning
CAUTION
Risk of injury caused by rotating parts
The measuring tip of the BeamMonitor BM+ rotates at high speed during the measuring
operation.
X
Do not reach into or hold any objects into the beam entrance of the device (see Fig. 7.1 on
page 13).
Rotating measuring tip
Fig. 7.1:
Danger due to the rotating measuring tip using the example of the BM+ 100
