TX150 S5
Options Guide
45
9
External interfaces
V
CAUTION!
Observe the safety instructions in the
chapter “Safety notes” on page 13
et seq. .
9.1
Installing the COM2 interface
Ê
Open the server as described in the
chapter “Preparation” on page 19
seq. .
Figure 29: COM2 interface
Ê
Remove the rear cover of PCI slot 5 and insert the slot cover of the COM2
interface in this slot as described in
section “PCI slot assembly” on page 42
.
Ê
Attach the connector Serial2 on the system board with the COM2 interface
connector.
Ê
Close the server, connect it to the power outlet, and switch it on as described
in the
chapter “Completion” on page 67
et seq. .
