52
Chapter 4 Web UI
4.2.9 Adv. KVM Blade Group (when PG-KVB102 is installed)
The installed advanced KVM Module (PG-KVB102) is displayed. The advanced KVM Module can
only be set from the Web UI of Management Blade. CLI is used only for referring information and
cannot be used for setting.
●
Blade Info group
Displays the following information of the advanced KVM Module.
●
KVM_Config group
Sets the installed advanced KVM Module.
When changing the settings, set parameters and click [Apply Changes].
FC Switch Blade Period Polling
Sets whether or not to enable checking of the FC
Switch Blade settings by the Management Blade on
a regular basis.
Check the [enable] box and click [Apply] to enable
checking the settings on a regular basis.
Set Password for Polling Account
Sets the password for logging into the FC Switch
Blade.
Note:
This setting is for storing password in the
Management Blade. This setting does not
set the password of the FC Switch Blade.
Reset
Resets the FC Switch Blade.
Display/Parameter
Description
Adv. KVM blade Manufacture
Displays the manufacturer.
Adv. KVM blade Manufacture Date
Displays the manufacture date.
Adv. KVM blade Serial Number
Displays the system serial number.
Adv. KVM blade Product Name
Displays the product name.
Adv. KVM blade Model Name
Displays the model name.
Adv. KVM blade Hardware Version
Displays the hardware version.
Display/Parameter
Description
Use DHCP (For KVM IP Address)
Sets whether to obtain IP address of advanced KVM Module
automatically (enables DHCP).
KVM IP Address
Sets IP address of advanced KVM Module manually.
KVM Gateway
Sets Gateway address of advanced KVM Module.
KVM Subnet Mask
Sets Subnet mask of advanced KVM Module.
KVM HTTP Port
Sets HTTP port of advanced KVM Module (default:80). If graphical
console redirection is performed, three consecutive ports from this
setting value are used by advanced KVM Module.
Display/Parameter
Description
