4
4C: Setting your own Hotspot SSID and Password
On the Navigation panel inside of the web portal, you can use the configure hotspot button to
set a new network name and password for your PTLink hotspot. To do this:
1.
Navigate to the web portal (ptlink-xxxxxx.local)
2.
In the Navigation panel, locate and select the
configure hotspot
button
3.
A window will appear. Enter the network name and password you wish to have and
press the update button
4.
PTLink may take a moment to configure. If you are connected to the hotspot, you will
need to select your newly created network inside of the WiFi selection panel of your
iPhone/iPad. If connected to a personal network, you will stay connected until you
switch to the hotspot which now is accessible using your new password.
4D:
Revert to default Network Name and Password
There may be a time when you change the Network Name or Password of your Hotspot
network, but forget the password, and are unable to access the Hotspot network; or you may
simply wish to return PTLink to its original state. To do this:
1.
Unplug all Primera units from PTLink.
2.
Power cycle PTLink, wait 1 minute. PTLink will revert to hotspot.
3.
Power cycle PTLink 2 more times without any printers plugged in, waiting at least 30
seconds between power cycles.
4.
After the second power cycle, PTLink will recalibrate and the WiFi SSID for the Hotspot
will be reset to the last six characters of your device’s MAC address(ptlink-
xxxxxx).
Section 5: Printing via AirPrint
1.
On your iPad/iPhone open the app you want to print from. Find the print option by
tapping the share icon
or
.
2.
Tap
or Print.
3.
Choose the PTI Color_Photo_IP60.
4.
Choose the number of copies.
5.
Tap Print.
