Primera BravoPro Disk publisher, User Manual

Page: 8 / 60

4 Getting Started
The Control Panel contains LED Status Lights and Buttons to
control the Publisher. The LED Status Lights indicate that
Power is ON. They also blink in certain patterns to indicate an
error or other condition of the Publisher. See Section 5 for a full
explanation of the LED Status Light conditions.
The
Power Button turns the Publisher's power ON and OFF.
When the front cover is opened, the Ink Cartridge Button is
used to position the Cartridge Carrier for easy ink cartridge
replacement. When the front cover is closed, pressing the Ink
Cartridge button will open or close the Printer Tray.
The
Input/Output Bins are situated under the top cover of the
Publisher. The bins will hold up to 50 discs. The right-side bin
is the Input Bin for blank media; the left-side bin is the Output
Bin for finished discs.
The
Reject Area is where discs are dropped if they do not pass
a software verification test. The discs slide down the ramp out
in front of your Publisher.
The
Front Cover is a durable plastic cover that will protect the
Publisher from dust and interference.
The
Ink Cartridge Carrier holds both a color ink cartridge
(right-side pen) and a monochrome ink cartridge (left-
side pen).
Rear Panel
This illustration shows the input ports and the power switch
found on the rear panel of the Publisher:
The USB 2.0 Port is connected to an open USB 2.0 port on your
PC with the USB 2.0 cable, included with your Publisher.
Power Input Port
Power Switch
USB 2.0 Port
510914.qxd 3/10/2008 3:40 PM Page 4