Primera 000424-510171-(05), User Manual

Page: 4 / 68

iv
The self-test should look like this:
6. Connect the printer to your computer using the proper
interface cable. For best results, use a IEEE 1284-Compliant
cable and do not connect to an A/B switch box. Also, note
that the printer will print fastest if your computer’s
parallel port is set to ECP mode (most new computers are
set to ECP). Your computer’s manual will have information
on changing the parallel port mode if you need to switch it
to ECP.
SOFTWARE INSTALLATION
Once you have set up your printer, you must then install all of
the appropriate software required for printing. The included
CD contains all of the necessary software. At a minimum, you
must install the printer driver appropriate for your computer’s
specific operation system (Windows
®
95/98, Windows
NT/2000, or Macintosh
®
). Below is a description of the CD
contents as well as installation instructions for each software
component.
CD Contents:
• CD Color Printer Driver III for Windows 95/98
• CD Color Printer Driver III for Windows NT/2000
• CD Color Printer Driver III for Macintosh
• 32-Bit Print Spooler for Windows 95/98 (provides
optimum print processing under Windows 95/98)
• 2 Sample CD Designs (TIFF format)
510171Pr5.qxd 5/2/2000 3:39 PM Page iv