Massage Host Operation Istructions
08
LED light
Increase the
intensity
ON/OFF
Reduce the
intensity
Press the ON / OFF button to start the unit, buzzing will be on with LED
lighting once. Press the ON / OFF button to turn off the unit, buzzing will be
on with LED lighting three times.
Press the "+" or "-" button to adjust the intensity, the output intensity total
have 15 levels, when the unit is turned on, the intensity is on 1 level, the
buzzing will be on with LED lighting once when you adjust the intensity.
And the buzzer will be sounded twice when it's in the strongest intensity or
lowest intensity.
When the unit leave the skin(The unit is turn on), the buzzing will be on with
LED Lighting to remind you, when the unit returns on the skin again, the
intensity will return to 1 level.
Using
Before use, please take the body parts to clean and keep dry, then Peel
off the surface of the transparent isolation film. Place the EMS device
onto the treatment areas (such as the back, shoulders, arms, legs, etc.)
and Press down firmly and ensure a full and firm contact with skin.
First use, please start from the low intensity, and then gradually increase
the intensity
Please charge in time, if the buzzing weakens, the current intensity
decreases, or the indicator light color is dimmed, the use of sudden
shutdown means that the battery is lower.
Turn off the power after use, and then removed from the human body.
After use, the product will be affixed to the Pad holder and stored in the
PVC carry bag, to prevent the gel dirty or dry.
The electrode gel pads are disposable, such as the use of 20 minutes
each time, about 30 times can be used,(which will vary and depend on
the frequency of use. Avoid touching the adhesive area of pads with
fingertips, the grease on which will shorten the pad lifespan.) The gel
pads should be replaced when they lose their adhesiveness. Keeping
pads clean will extend their lifespan.
Tips
07
