
3
SAFETY PRECAUTIONS FOR DRILL
■ Wear ear protectors when impact drilling. Exposure to noise can cause hearing
loss.
■ Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring.
■ Special Safety Instructions for Battery pack and Charger
If under extreme conditions any electrolyte should escape from the battery, it's
essential to avoid contact with skin. If electrolyte does come into contact with your
skin, rinse it off with water. In the event of electrolyte contact with your eyes, it's
essential to consult a doctor.
a) Before the use of the charger and the battery pack, read the instruction
manual for it carefully.
b) During the charge process, the current used should correspond to the current of
the battery charger.
c) Never let moisture, rain or splashed water reach the charging location.
d) The ambient temperature must not exceed 40
o
C.
CHARGE BATTERY AT LEAST 6 HOURS
before initial use.
1.
CHARGE AT ROOM TEMPERATURE.
The
room temperature must be higher
than 32°F and lower than 104°F.
2.
DO NOT CHARGE IF THE CHARGER’S CORD OR PLUG IS DAMAGED.
Charging with
a
damaged cord may result in
a
fire or electrical shock.
If the
charger is damaged in any wa
y
, have it repaired by a qualified serviceman.
3.
USE WITH CAUTION,
when coming into contact with items that can cause
an electrical short,
such as paper clips, nails, the sides of a metal tool box.
4.
DO NOT INCINERATE THE BATTERY
This product has been carefully engineered and manufactured to give you
dependable operatio
n
. Please read this manual thoroughly before operating your
new product, as it contains the information you need to become familiar with its
features and obtain the performance that will bring you continued
use for many
years.
WARNING!
The warnings, cautions, and instructions detailed in this manual cannot
cover all possible conditions and situations that occur.
USE COMMON SENSE AND CAUTION WHEN OPERATING THE TOOL.
PRECAUTIONS FOR BATTERY AND CHARGER
!
!
!
Summary of Contents for Cab-CD304-2L
Page 7: ...7 PARTS LIST ...
Page 15: ...15 LISTE DES PIÈCES ...