Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
UXR-001-E
ASSEMBL
Y INSTR
UCTIONS–MOUNTING BRA
CKETS
98.50”
96.00”
(Do Not Drill. Shown
for reference only.)
6.00”
6.00”
10.50”
M8 x 35mm Bolt
Sealing Washer
Neoprene Washer
Fender Washer
M8 Lock Nut
86.50”
74.50”
62.50”
72.00”
60.00”
6.00”
6.00”
10.50”
84.00”
Dimensions A
Dimensions B
UTB-2316 MOUNTING BRACKETS
BRACKET PRE-ASSEMBLY
Drill holes into the Service
Body mounting location
according to dimensions
shown for 8.00 ft rack
configuration.
0.1
Apply Anti-Seize compound to Mounting Bracket bolts. The
shorter bolt assemblies are on the outside as shown.
0.3
0.4
Torque all Mounting
Bracket bolts to 90 in-lbs.
Dimensions shown below are for 5’ (60.00”), 6’ (72.00”), and
7’ (84.00”) spacing.
Dimensions A are measured from center to center of top
mounting rail. Dimensions B are measured from outside
Bracket Hole to outside Bracket Hole.
0.2
