Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
3
FBM-1026-BLK
ASSEMBL
Y INSTR
UCTIONS–FLEX CHANNEL MOUNTING
Rear
Front
Lef
t
Right
See your Cap Manufacturer’s
OEM for mounting locations
1.50”
16.75”
19.75”
FBM MOUNTING
CHANNELS AND MOUNTING BRACKETS
Slide Channel Connectors
into Channels as shown.
1
Install Channels into roof channel grooves.
Install Channels into roof Channel grooves.
3
4
2
Install fasteners into factory
roof mounting hole locations
then torque nuts to 80 in-lbs.
Determine the best location to drill for the Channel Mounting Brackets using the guidelines below.
* RECOMMENDED: After installing the Mounting Brackets in Step 1, apply Silicone Sealant (not provided in this kit)
to bolt heads to seal against water intrusion.
