Prime Aquatic
–
10
ensuring that the rubber seal on the paper bag fits over the indent on the
plug-in connector hole. Place the motor head back onto the collection tank,
ensuring the locking clips are relocated back into the corresponding indents
on the collection tank, with the electrical cable positioned on the opposite
side to the suction hose plug-in connector hole (7).
Once the above has been completed, plug the device into the RCD. To turn
on, push the switch (2) to I MANUAL. In this position, the device operates
continuously.
Switch off the device after use by pushing the switch to the OFF position (0).
Blowing : Connect the suction hose (9) to the blow connector (18) on
the vacuum.
Cable storage. The power cable can be wound up onto the hook (19)
Maintenance and cleaning.
Important!
Always ensure that the device is unplugged from the RCD before attempting
any maintenance or cleaning.
The vacuum cleaner requires little maintenance other than cleaning.
Thoroughly clean the collection tank (8) and dirt collecting bag (4) with water
and mild household detergent.
Check suction hose (9), suction tube extensions (10) and drain hose (3)
occasionally for possible blocking or dirt residues and clean when necessary.
Carefully wash the filter sponge for the motor (13) with water and mild
household detergent. Dry for storage.
When storing, ensure all parts are completely dry and store in a dry, frost
free area which is inaccessible to children.
Correct Disposal of this product
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To