Primare DVD30, Manual

Page: 27 / 42

22
DVD30 UNIVERSAL DISC PLAYER
SETUP MENUS
Gain Settings -
EXPERT
• Set in Setup Navigator
Defaut setting: Fix
You only need to make this setting if you connected this
player to your amplifier using the 5.1 channel analog
outputs. This setting does not affect digital audio output.
Under the default setting, all channels are output at the
relative volumes they were recorded at. Change the setting
to Variable if you want to adjust the relative volume levels
of any of the speakers. Adjustment is in the range of -6dB
to +6dB, in steps of 0.5dB.
Speaker Settings
Distance
• Set in Setup Navigator
Default Distance: All 3,0 m
The next step in setting up the speakers is to set the
speaker delays to ensure that the sound image is correctly
focused.
Delaying the sound from a speaker by 1 milli-second is
equivalent to moving the speaker one foot (0.3 m) further
away from the listener. Because the center speaker is
usually physically closer to the listener than the left and
right speakers you should add a delay to the center speaker
to ensure that the sound from all three front speakers
reaches the listener at the same time. Regarding the rear
speakers you will normally add a delay to increase the
spaciousness of the sound. The left- and right surround
speakers are fixed.
You only need to make this setting if you connected this
player to your amplifier using the 5.1 channel analog
outputs. This setting does not affect digital audio output.
Follow the on-screen displays to describe which speakers
are in your system and their distances and positions.
• Set the distance of your speakers in the Distance
screen:
When set to ‘Variable’, the overall output level may sound
quieter than when set to ‘Fix’. This is not a malfunction.
Follow the on-screen displays to select speakers and set the
channel levels.