6
DELAY BOX
7
DELAY BOX
OPERATING THE PRIMARE DELAY BOX
A. Standby ON/OFF
B. Increase/decrease
delay time in
milliseconds
C. Bypass
D. Input 1 and 2
E. Preset 1 and 2
To switch on from standby or to standby
• Pressing on the front panel or on the remote
control, will change the standby mode.
Infra-red remote control
The Delay Box is fully controlled by an infra-red remote
control.
IR-back
The Delay Box can also be controlled by using the
IR-input at the backpanel. Make sure that the Delay Box
is in standby mode.
• Hold down button
2
on the front panel and press .
The standby indicator will blink
–2–
.
• Hold down button
1
on the front panel
and press to
restore the IR-input to the front.
–1–
is displayed for a
couple of seconds.
Mains ON
• Plug the lead from the power adapter into the Primare
Delay Box and the other end into a wall socket.
The stand by indicator will light up and the Delay Box is
ready for operation.
A
B
C
D
E
To dim the front panel display
• Simultaneously press button
1
and
2
on the front panel
for two seconds. The display will dim.
When adjusting any values the display will temporary
light up for a couple of seconds.
• Simultaneously press button
1
and
2
on the front panel
for two seconds to restore the Delay Box from dim mode.
The Remote Control
Summary of Contents for DelayBox
Page 1: ...Primare Delay Box...
Page 8: ......
