background image

5

CD31 COMPACT DISC PLAYER USER GUIDE

HOW TO GET STARTED

This chapter introduces the back panel connections and the front 
panel controls of the CD31 Compact Disc Player. 

Power connection

Warning

: Before connecting power check 

that the required supply voltage, indicated on 
the back panel, cor re sponds to your local AC 
supply. If a different voltage is stated on the 

type plate do not connect the CD31 to the mains power,  
and seek advice from your dealer.

Connect the mains power using the enclosed mains cable.

NOTE

: Always disconnect the CD31 and all other units 

in the system from the mains power before connecting or 
disconnecting any of the cables.  Failure to do this might 
seriously damage the unit.

Safety instructions

To prevent fi re or shock hazard, do not expose this 
appliance to dripping or splashing. No objects fi lled with 
liquids, such as vases, should be placed on the CD31.

If you want to build in the CD31 you need to be sure to 
allow space of at least 20 cm behind, 10 cm on both sides 
and 30 cm above the top panel of the unit. This is to 
prevent fi re or damage caused by overheating. Also make 
sure that the main switch is accessable.

Switching on and off 

To switch on

• Use the main switch under the left-hand edge of the 

housing (1).

During normal operation you can leave the CD31 
switched on and in standby mode.

To switch on from standby or to standby

• Pressing     on the front panel or on the remote con-

trol, will change the standby mode.

1

Summary of Contents for CD31





















Reviews: