C d 2 2 u s e r g u i d e
1 u n p a C k t h e C d 2 2
Your CD22 is supplied with the following
components:
•
Mains cable.
•
C23 remote control.
•
Two batteries for the remote control.
If any of these items are missing please contact
your supplier. We recommend you retain the
packaging in case you need to transport the unit
at a later date.
2 C o n n e C t t o a n
a m p l i f i e r
Analogue outputs
The analogue output provides RCA sockets for
connection to an appropriate stereo amplifier or
preamplifier.
•
Connect the RCA outputs to your amplifier
or preamplifier using RCA cables.
Digital outputs
Alternatively the CD22 Compact Disc Player
provides SPDIF and TOSlink digital outputs for
connecting to a digital preamplifier or digital
surround processor.
•
Connect the appropriate output to your
preamplifier or surround processor using a
suitable cable.
C o n n e C t p o W e r
•
Plug one end of the mains cable supplied with
the CD22 into the power connector on the
back panel, and connect the other end to a
wall socket.
If this cable is not suitable for your power outlets
please contact your supplier for an alternative
cable.
Note
: See
Phase, page 8, for information about
getting the best sound from your CD22.
WARNING:
Always disconnect the
CD22 from the mains power before
connecting or disconnecting any cables.
•
Switch on the CD22, using the switch on the
back panel.
The standby indicator will light up on the front
panel.
To switch on from standby
•
Press the
O
button on the front panel or
remote control.
The display shows:
PRIMARE
Press the
O
button again to switch to standby.
4 p l a y a C d
•
Press and hold down the
*
/
å
button on the
front panel or remote control to open the
tray.
•
Place the CD in the tray with the label facing
upwards.
•
Press the
>
/
]
button on the front panel, or
the
>
/
=
button on the remote control, to
close the tray and start playing the disc.
For more information about playing a CD see the
next page.
For more information about playing music files
from a CDR or USB disk see
Playing music from a
CDR or USB disk, page 7.
getting started
Set up your CD22 in four simple steps:
