Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 2
MODEL: MNTS-15R
THE HIGHLANDER 15FT. TRIPOD
5. Turn the assembled platform over so that
the top of the platform is on the ground.
Attach Handle Rail
H
to the bottom of the
assembled platform using
2-M12x65mm Bolts
for each Handle Rail.
A
B
65
H
H
6. With the platform still upside down, Attach
Rear Leg Brace
J
to the rear of the platform using
2-M12x75mm Bolts
for each Rear Leg Brace.
A
B
J
J
75
75
7. Turn the platform upright.
Attach Seat Pedestal
C
to the center of the platform
using
4-M12x45mm Bolts
.
B
A
C
45
8. Disassemble the
RED Bolt with Large Washer.
Place the Large Washer on top of the Seat Pedestal
C
. Hold
the assembled Seat on the Seat Pedestal. Place a metal
washer onto the
RED
bolt, then insert a nylon washer on the
bolt. Insert the bolt through the Seat Platform, Large Washer,
and the seat Pedestal. Place another nylonwasher onto the
bolt, then the last metal washer and tighten with the nut.
RED BOLT
C
E
©2012 (rev. 04/12)
