©2013 (rev. 12/12)
Distributed by Tahsin Industrial Corp. USA 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 1
MODEL: WMCS-400
CLIMBING STAND
2. Lift railing and insert frame support through attached bolt
L
3. Thread T-knob on bolt.
Frame Support
4. Insert
1-M10 Quickclip
L
through frame support and
welded tab to secure frame in place.
6. Insert Shooting Rail
D
into Seat Platform
A
.
Adjust Shooting Rail to proper length and insert
2-M10 Quickclips
L
through shooting rail and frame.
L
D
1. Insert
1-M12x75mm bolt
through the bottom of Foot Platform.
75
B
5. Repeat above steps to assemble Seat Platform
A
.
