Assembly Instructions
DETAILED BUCKLE AND STRAP INSTRUCTIONS
1
2
3
4
Pull strap to desired length.
Press down on latch and
insert strap underneath
teeth as shown.
Pull slack to tighten.
Hold buckle as shown.
Model: PVSL-120
Double Step 20’ Climbing Stick
2
1
3
4
1
Wrap strap around the tree.
Make sure the strap is flat
against the tree. Attach hook
end of strap to keeper on
opposite side of ladder.
2
Thread the strap through the
buckle. (See Buckle Strap
Instructions for weaving)
3
Tighten strap to hold the Rip Rail securely
against the tree. While wearing your Fall
Arrest System with climbing belt, climb
bottom section to attach second section.
Repeat steps 1 through 3 to attach all
ladder sections. Reverse these steps to
remove ladders from tree.
4
IMPORTANT:
Be sure to set
stand where you are able to step
DOWN onto stand from Rip Rails.
Sectional ladders and steps shall be
spaced on the tree to insure each step
is no more than 18 in. apart.
W A R N I N G
Customer Service Department 1-866-972-6168
www.primaltreestands.com
Distributed by Acheson Harriman Swan, LLC, 2407 W. Euclid Ave., Littleton, CO 80120
©2021 (rev. 1/21)
