Primacoustic FlexiFuser Owner'S Manual Download Page 3

Page: 3 / 3

ASSEMBLY INSTRUCTIONS

If the vertical deflectors are to be fixed in place insert

a second metal pin in the rear hole of each deflector.

Skip this step if the deflectors are to be movable and

continue to step-8.

REAR WALL: Angling the deflectors in one

direction can prevent sound from bouncing

between parallel walls by redirecting sound.

Opposed and varied deflectors distribute

sound in several directions helping to diffuse

reflections.

Insert six metal pins into the bottom section.
Guide the six vertical deflectors onto the pins.

Insert four wooden dowels into the side sections and

center divider.

Insert a metal pin into the middle hole of each

vertical deflector.

Choose angles that work where the FlexiFuser will be

placed within the room.

Attach the top section. Ensure all the pins and

dowels are lined up correctly.

Secure the top section using five large flush-mount

Phillips screws in the pre-drilled locations.

SIDE WALLS: Parallel deflectors break up

primary reflection when mounted to the rooms

side walls.

Summary of Contents for FlexiFuser

Page 1: ...rea to scatter primary reflections standing waves and flutter echo A series of variable pitch deflectors may be rotated to a desired position to dissipate sound energy and retain a sense of air and am...

Page 2: ...ttach to the side section Insert four dowels into the ends of the lower rear cross support and attach to the side section Guide the other side section onto the dowels and secure with two large flush m...

Page 3: ...ng to diffuse reflections 5 7 6 8 Insert six metal pins into the bottom section Guide the six vertical deflectors onto the pins Insert four wooden dowels into the side sections and center divider Inse...