6
IMPORTANT: DO NOT PERFORM MAINTENANCE
OR CLEANING OF THE EXTRACTOR WITHOUT FIRST
SWITCHING OFF THE ELECTRICITY SUPPLY.
NOTE: LED lights replacement must be done by a
qualified electrician.
Fig. 3-I
Fig. 3-II
Fig. 3-III
The light is designed for use during cooking and not for general room
illumination. Extended use of the light can reduce the life span of the
lights.
Lights replacement is not covered by the guarantee.
Remove the lamp by flat-head screwdriver (Fig.3-I).
Check with your local retailer or dealer to buy new same LED lights for
replacement.
Pull out the lamp. Unplug the lamp wire connector. Replace the lamp
(Fig.3-II).
Plug wire connector with new lamp. Put the new lamp into lamp holder.
Push the LED lamp into the hole with sound of snap (Fig.3-III).
230V 2X1W LED MAX