Prima LV-1927P, Operating Instructions Manual

Page: 8 / 45

BUTTONS AND INTERFACE POSITION
PO WE R CH + CH- V + V- MEN U INP UT
Remote con trol window(IR)
Led indicator
7
(Power on/Standby)LED Indicator: Press to turn on and off. POWER
Indicator on (Red): Standby mode.
Indicator on (Green) : Power on mode.
Control window, and 30 to the left or right side and 20 bove or below the control window.
0 0
2. The functions of the buttons are described as below:
MENU: Press to display the OSD menu, Press again to exit the menu.
CH-/CH+: Press to scan through channels, when pressing and holding down either button user
can scan channels quickly.
They are also can be used to move down/up in the OSD menu screen.
VOL-/VOL+: Press to adjust the volume.
They are also can be used to move left/right in the OSD menu screen.
POWER: Turn on/off the TV set
1. IR Infrared Receives IR signals from the remote control.
（ ）
The effecti ve receiving scope for the signal is within 3-5 meters from the front of the remote
VOL+button can be used to skip forward to next menu.
FR in
P C Audio in
S-Video in
C omponent Video in
Audio in
Video in
VGA
OP EN/CLOSE
PLAY/PAUSE
DVD
Component Video in : Connect it to the composite jack of your DVD, VCR or other AV program player.
VGA : For PC display purpose. Connect it to the Mini D-Sub 15 pins analog output jack of the PC.
Audio in-(R/L) : Connect them to the audio output jacks of your DVD/VCR, and S-Video audio input signals
share these terminal.
Video in : Connect it to the video output jack that has video output.
S-Video in : Connect it to the S-Video output jack of your VCR or other video equipment that has S-Video.
FR in : Connect antenna or cable 75 Ohm coaxial Aerial to receive TV signal.
INPUT: Press to select the source: TV, AV,SVIDEO, COMPONENT,PC, DVD
PC Audio in: connect the PC output connector from a PC to the PC audio input.