3
PART 2: WARNINGS
BEFORE STARTING TO USE THE APPLIANCE, PLEASE TAKE ALL ESSENTIAL
SAFETY MEASURES AND THOROUGHLY READ THE USER MANUAL
This
appliance has been designed for domestic use as built-in furniture.
After removing the packaging, make sure to check if there is any damage to the appliance.
If there is any damage, never attempt to use the appliance and immediately contact your
Authorized Service Agent. Dispose of unwanted packaging responsibly, recycling where
possible.
The appliance must be installed and put in operation by an authorised technician under the
conditions provided by the manufacturer in this manual. The manufacturer cannot be held
responsible for any damage that might occur due to faulty installation.
Before connecting your appliance to the mains at home, make sure to check the conformity
of voltage and gas settings, which are specified on the information sticker attached to the
appliance and/or packaging, with the usage conditions available.
Do not operate the oven before it is fully installed.
Be sure that all of its buttons are turned off when the appliance is not in use.
Be sure that the supply cable is not wedged during the installation of the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Before replacing the oven illuminating light, turn off the power to the appliance.
Switch off the appliance before cleaning, maintenance work etc.
Some parts of the appliance may preserve their heat for a long time; please wait until the
parts have cooled down before touching them.
Do not keep flammable items/substances near the appliance while it is in use.
When operating other electrical devices near the appliance, pay attention that their cables
do not come into contact with heated parts.
Your appliance needs sufficient air circulation while it is operating. Carefully read the part
of this manual, where installation procedures are explained and make sure the relevant
conditions are satisfied.