background image

               Digital Audio Output: AC-3, MTS: Mono 
5)  Setup menu, Tuning Band: Air 
6)  Feature menu, Sleep Timer: Off, Menu Language: English 
Note: Except for Color Temperature of Cool, the Advanced Video Menu of YPBPR/YCBCR and 
VGA channels sets according to the adjustment of factory. 

Trouble shooting 

Before servicing please check to find the possible causes of the troubles according to the table 
below.  

1.Antenna(signal): 

Picture is out of focus or jumping 

z

  Bad status in signal receiving 

z

 Poor 

signal 

z

  Check if there are failures with the electrical connector or 

the antenna. 

z

  Check if the antenna is properly connected.   

Fringe in picture 

z

  Check if the antenna is correctly oriented. 

z

  Maybe there is electric wave reflected from hilltop or 

building. 

Picture is interfered by stripe 
shaped bright spots   

z

  Possibly due to interference from automobile, train, high 

voltage transmission line, neon lamp etc. 

z

  Maybe there is interference between antenna and power 

supply line. Please try to separate them in a longer 
distance. 

z

  Maybe the shielded-layer of signal wire is not connected 

properly to the connector. 

There appear streaks or light color 
on the screen   

z

  Check if interfered by other equipment and if interfered 

possibly by the equipment like transmitting antenna, non 
professional radio station and cellular phone.     

 

2.TV set: 

Symptoms Possible 

cause 

Unable to switch the power on 

z

  Check to see if the power plug has been inserted 

properly into the socket. 

No picture and sound 

z

  Check to see if the power supply of liquid crystal TV has 

been switched on. ( as can be indicated by the red LED 
at the front of the TV set) 

z

  See if it’s receiving the signal that is transmitted from 

other source than the station 

z

  Check if it’s connected to the wrong terminal or if the 

input mode is correct. 

z

  Check if the signal cable connection between video 

frequency source and the liquid crystal TV set is correct.

Deterioration of color phase or 
color tone 

z

  Check if all the picture setups have been corrected. 

Summary of Contents for LC-37FB32




















































Reviews: