USER’S MANUAL
5
AP4.9 bit /
4. connection PaneLs - descriPtion
PoWer.
+ Power (11-15 VDC):
connection terminal for
AP4.9 bit
power supply positive pole. The jack accepts a stripped
cable up to 15mm/0.6" with maximum section of 8 AWG (
∅
3,2mm / 0.12”). For better power transfer we
recommend using cables with the largest possible cross-section and with the same cross-section as the cable
connected to the negative pole.
- Power (Ground):
connection terminal for the negative power supply pole of the amplifier. Connect here the negative
battery cable or a cable connected to the vehicle chassis. The opening will take a stripped cable up to 15mm/0.6"
with a maximum section of 8 AWG (
∅
3,2mm / 0.12”). For better power transfer, we recommend using cables with
the largest possible section and with the same section as the cable connected to the positive pole.
In order to correctly connect the ground (-), use a screw that is already present on the metal part of the vehicle; If
necessary, remove any paint residue or grease, using a tester to make sure there is continuity between the negative
terminal (-) on the battery and the mounting point. If possible, connect all of the grounds on the audio components
to the same grounding point. This helps reduce most of the interference than can occur in audio reproduction.
WarninG:
Make sure the connection polarity is as indicated on the terminals. A misconnection may result in damage to the
AP4.9 bit. After applying power, wait at least 10 seconds before turning the AP4.9 bit on.
4
1
4
0 1
2
3
4
5
6
7
UPGRADE
OFF ON
1
2
5
4
6
7
8
9
12
11
10
3
13
Summary of Contents for audison AP4.9 bit
Page 1: ...USER s MANUAL rel 1 0 c AP4 9...
Page 58: ......
